

Product Details
LD-384 Zinc-Plated Steel Barrel Bolt Slide Lock Deadbolt
LD-384 Zinc-Plated Steel Barrel Bolt Slide Lock Deadbolt, a heavy-duty surface-mounted security bolt available in 4 to 12 inch sizes with 8-12mm bolt diameter. Features padlock compatible loop option for enhanced security on doors, gates, sheds, and cabinets.
Core Features
- Zinc-plated carbon steel body for corrosion resistance
- Precision steel bolt pin with smooth sliding action
- Available in 4, 6, 8, and 12 inch lengths (100-300mm)
- 8-12mm bolt diameter for various security levels
- Surface mount design with easy installation
- Optional padlock loop for keyed security upgrade
- Multiple finish options: silver, black, brass, white
Application Scenarios
- Residential interior and exterior door secondary locking
- Garden gate and fence panel security
- Shed, garage, and outbuilding door locking
- Window and skylight supplementary security
- Cabinet, wardrobe, and furniture locking
- Commercial and industrial facility security
FAQ
What size barrel bolt should I use for different applications?
For cabinet doors, interior closet doors, and small furniture, a 4-inch (100mm) barrel bolt with 8mm diameter is usually sufficient. For standard interior doors and small windows, a 6-inch (150mm) bolt works well. For exterior doors, garden gates, and shed doors, an 8-inch (200mm) bolt with 10-12mm diameter provides good security. For heavy double gates, barn doors, and large industrial doors, a 12-inch (300mm) bolt with 12mm diameter is recommended. For maximum security on external applications, choose the padlock loop version and use a quality padlock. The bolt size should be proportional to the door size for both security and visual balance.
How do I install a surface-mounted barrel bolt correctly?
Start by positioning the bolt body on the door or gate at your desired height, typically 10-15cm from the top or bottom edge for best security. Mark the screw holes through the mounting plate. Pre-drill pilot holes slightly smaller than the screw diameter to prevent wood splitting. Secure the bolt body with the provided screws. Close the door or gate and mark the position of the strike plate on the frame, ensuring the bolt pin aligns perfectly with the strike plate opening. Install the strike plate with screws. Test the bolt operation by sliding it back and forth several times; it should move smoothly and engage fully with the strike plate. If the bolt binds, adjust the strike plate position slightly. For padlock loop versions, verify that the padlock can be inserted and removed easily when the bolt is in the locked position.
Are zinc-plated barrel bolts suitable for outdoor use?
Yes, zinc-plated steel barrel bolts are designed for both indoor and outdoor use. The zinc plating provides a protective coating that resists rust and corrosion from rain, humidity, and normal weather exposure. For typical outdoor applications like garden gates, shed doors, and fence panels, zinc-plated bolts will provide years of service. However, in highly corrosive environments such as coastal areas with salt spray or industrial locations with chemical fumes, we recommend stainless steel or powder-coated options for even better corrosion resistance. Regular maintenance such as wiping the bolt clean and applying a light oil lubricant to the moving parts will extend the service life of any outdoor hardware.
Can the barrel bolt be used horizontally and vertically?
Yes, barrel bolts can be installed in either orientation. Vertical mounting (top or bottom of the door) is the most common and provides the best security because gravity helps keep the bolt engaged. Horizontal mounting (side of the door) is also popular and works well for gates, sliding doors, and French doors. Some users install bolts in both orientations for maximum security. The bolt design works equally well in any position because the bolt pin slides within a barrel guide that holds it securely regardless of orientation. When installing horizontally, make sure the bolt is level so it slides smoothly without binding. For very long bolts (8 inches or more), horizontal mounting may cause slight sag over time, so vertical mounting is preferred for longer lengths.

