
Product Details
LD-256 Polyester Ratchet Tie Down Strap 2 Inch x 8m
LD-256 Polyester Ratchet Tie Down Strap 2 inch x 8m with 3000kg breaking strength. Orange webbing with forged steel hooks for cargo securing and vehicle transport.
Core Features
- 50mm (2 inch) wide high-tenacity polyester webbing
- 8m length with 3000kg breaking strength and 1000kg WLL
- Zinc alloy ratchet with smooth gear tensioning mechanism
- Forged steel hooks in S, J, flat, and D-ring types
- EN 12195-2 compliant for European transport regulations
- High-visibility orange webbing for safety compliance
Application Scenarios
- Flatbed trailer and truck cargo securing
- Vehicle and equipment transport tie down
- Motorcycle and ATV transport securing
- Boat and marine vessel transport
- Moving and relocation cargo fixing
- Construction material hauling and securing
FAQ
What is the maximum load this strap can secure?
The LD-256 strap has a breaking strength of 3000kg and a working load limit (WLL) of 1000kg. The WLL is the maximum safe working load, set at one-third of the breaking strength per EN 12195-2 regulations. Never exceed the WLL. For loads over 1000kg, use multiple straps to distribute the load. Always use a minimum of 2 straps per load for redundancy.
How do I properly tension the ratchet strap?
Attach both hooks to secure anchor points. Pull the loose webbing end to remove slack. Pump the ratchet handle up and down 3-5 times to tension the strap. Do not over-tension — the strap should be firm but not deforming the load. To release, pull the release lever and open the ratchet fully. Never stand in the line of the strap while tensioning in case of failure.
Can this strap be used for lifting loads vertically?
No, ratchet tie down straps are designed for load securing and restraint during transport, not for vertical lifting. For lifting applications, use certified lifting slings (webbing slings or chain slings) that are designed and rated for vertical lifting with appropriate safety factors. Using tie down straps for lifting is dangerous and violates safety regulations.
How should I maintain and store ratchet straps?
Clean straps with mild soap and water after use, especially if exposed to salt, chemicals, or road grime. Air dry completely before storage — never store wet straps as they may develop mold. Inspect webbing for cuts, abrasions, or chemical damage before each use. Store in a dry, UV-protected location. Replace any strap with visible damage or that has been overloaded. Lubricate the ratchet mechanism periodically with light oil.


